Latest Images

2131569700_jakeundercar.JPG

Sat, 30 Jan 2021 01:42:47 +0000

Intake plenum and coil cover

Fri, 11 Sep 2020 12:47:57 +0000

Match ported and blended runners should help with flow a little more down in the lower RPM's, also flashed up with a squirt of 2 pack

Garrett GTW 3884rs

Fri, 11 Sep 2020 12:47:41 +0000

Custom built Garrett GTW 3884rs with dual ceramic ball bearings and 68mm wheel upgrade and 45mm internal wastegate. Should be good for 800rwhp at 30psi

Turbo upgrade

Fri, 11 Sep 2020 12:47:33 +0000

A custom built Garrett 3884 with a compressor wheel upgrade to the 68mm 10 blade gen 3 unit and a 45mm internal wastegate. This is the street use turbo, a much bigger unit will be fitted to a 6boost manifold with 50mm external gate for serious dyno days and the strip.

Some of the parts taking over the lounge room floor!

Fri, 11 Sep 2020 12:47:13 +0000

I have been adding to the parts pile for a few months now, the Mrs wanted it out of the house.... So it's time to build it!

Barra block

Fri, 11 Sep 2020 12:46:56 +0000

Fully machined, deburred and blueprinted 2007 BF mkll block from a N/A Fairmont with only 40,000 km on it. .010" oversized bore, decked and squared by rehoning the crank tunnel to factory specifications. Block has been sonic tested and proven to have .150" minimum wall thickness on all cylinders.

Rods, pistons and girdle

Fri, 11 Sep 2020 12:46:49 +0000

The bottom end upgrades, including stud kit 13mm girdle, and race series bearings.

Spool drag pro rods with CP pistons

Fri, 11 Sep 2020 12:46:45 +0000

Set of balanced and X-rayed spool drag pro rods fitted with a set of custom order CP pistons and heavy duty wrist pins.

CAR_FRONT.JPG

Thu, 10 Sep 2020 13:05:44 +0000

IMG_0625.JPG

Sat, 21 Sep 2019 14:44:53 +0000