Jump to content

Recommended Posts

  • ŠύЂפֿĺmβø ™
  • Legacy Donating Member
  • Member For: 18y 6m 21d
  • Gender: Male
  • Location: Melbourne
Posted (edited)

Well,

My BA's Paint has been "Flaking off" like no tomorrow, Especially around the fuel cap, on the roof and doors. It seems there is a problem with the Shockwave paint which causes it to flake off (See attached pictures)

So I took it to Westpoint Ford this morning, and it looks like they will be doing a full respray from the metal through Warranty due to something about the paint & primer not going well together... Ill need to wait for them to call me back and organise a date, But ill be without my baby for at least 4 weeks :(

After looking around on some other "Ford forums", It seems that this is a common problem with BA/BAII & BF Shockwave Cars, Especially ones built in 2005. It usually starts off looking like a little stone chip, but once the paint is removed , Every time you wash it more and more paint will come off because the water is getting under there. If you want the link to the thread just pop me a Personal Message and ill be more than happy to give it to you.

If anyone here sees this happening to the car, I would recommend taking it back to Ford and getting them to fix it up.. They should fix it up under Warrenty and also give you a hire car for the 4 weeks (So I have heard from other people that have had to have it resprayed)

DSC00002.jpg

Fuel Cap

DSC00003.jpg

Fuel Cap #2

DSC00004.jpg

Passenger Rear Door

DSC00005.jpg

Passenger Rear Door #2

DSC00006.jpg

Drivers Side Pillars

DSC00007.jpg

The start of the Roof

Keep in mind that I discovered this about 3 - 4 week ago starting to happen, All that flaking is from TWO washes.

Cheers,

Jimbo

Edited by SubJimbo
  • Replies 117
  • Created
  • Last Reply

Top Posters In This Topic

  • Sucker
  • Moderating Team
  • Member For: 22y 2m 27d
  • Gender: Male
  • Location: Brisbane
Posted

:3gears:

Something you'd expect on a 20 year-old vehicle that's never washed and left out in the weather!

  • Member
  • Legacy Donating Member
  • Member For: 20y 2m 3d
  • Gender: Male
  • Location: Sydney NSW
Posted

You see that kind of thing from dodgy resprays, but not factory paint.

Hope it comes out nice when finished

  • Member
  • Member For: 21y 3m 29d
  • Gender: Male
  • Location: New Zealand
Posted

I would have said that is more likely to happen from an undercoat not being sanded or something - ie shiny on shiny doesnt stick.

I hope my car doesnt start that!

I have seen another car with a huges patch missing off a door - but cant remember what colour it was.

  • You are a dead set goose
  • Legacy Donating Member
  • Member For: 20y 7m 22d
  • Gender: Male
  • Location: Melbourne
Posted

Crazy stuff. I washed that car every week, waxed it every 2 months, and had it polished at a place in Ringwood every 6 months, for 2 years and it does that!

Thank fark they fixing it under warranty Jim.

  • Moderating Team
  • Member For: 23y 5m 21d
  • Gender: Male
  • Location: Sydney
Posted

Ive seen that sorta thing happen when the undercoat isnt rubbed down properly, and the top coat just flakes off.

Id like to see what would happen if you got a air gun/nozzle onto it, I reckon it would quickly turn your blue car to grey!

  • NOT THERE!... THERE!
  • Member
  • Member For: 18y 3m
  • Gender: Male
  • Location: Melbourne
Posted

Fark, that's no good at all.

I've got a T in Shockwave too so I'll be lookin' out for this starting on mine.

Would you mind PMing me the link to that other thread if you get a chance?

Cheers,

Clem

  • Cant wait to drive it
  • Legacy Donating Member
  • Member For: 18y 9d
  • Gender: Male
  • Location: Golden Bay,WA
Posted

hmmmm any newer colours you like wander wat your chances of a colour change would be

  • ŠύЂפֿĺmβø ™
  • Legacy Donating Member
  • Member For: 18y 6m 21d
  • Gender: Male
  • Location: Melbourne
Posted
hmmmm any newer colours you like wander wat your chances of a colour change would be

Not very good I dont thnk :P...

I love my colour anyways :)

  • Damn You's A Sexy Chich
  • Member
  • Member For: 18y 5m 6d
  • Gender: Male
  • Location: Your House
Posted

factory primers aren't rubbed down at all, they are usually sprayed wet on wet, so if the primer had to much time to cure before the colour was applied then theres your flaking paint problem...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...