Wa Xr6T Maintenance Day Round 3

[discostig]

Keen to see that! hahaha.

[arronm]

I would like to hangout with you guys. I have done a fair bit of spanner work on these cars and can bring some special tools to help with the hard jobs. I will bring 24mm gear and a gas torch to anneal the copper washers. BBQ is it.Arron

Edited 13/07/13 11:15 AM by arronm

[Boganspeed]

Good onya Arron, probably won't be anything super challenging to be done but you never know.

At the very least, we can use the oxy to finish off the snags.

[IH8TOADS]

I like the poll lol. Ill try and make this one but it will be a last minute thing. I won't have much to add really, but always enjoy a chin wag.

[GeGe6]

I know some of you guys are planning to to turbo oil line and thought you might like part number off anodized clamps I used to position my earls kit.

Part number is AF 156-08BLKClamp ID is about 12mm which fits to the steel line running to turbo (cooling line I think it is).If you are using a earls kit which from memory might be -6 Teflon braid with a OD of about 8mm I think.Given this I just pack out the braid line with rubber to secure.

Also a link for EBay or can order through Coventrys or any stockist of Areoflow.http://m.ebay.com.au/search?cmd=SKW&kw=AF+156-08blk&pgn=1 Edited 14/07/13 04:46 AM by GeGe6

[GeGe6]

Photo of turbo oil line clamps.

Tried to add to last post but couldn't.

[arronm]

Good idea but cable ties are cheaper. Someone should buy a section of heat sleeve and everyone can share it.

Like this. I have a whole packet I will bring some along (cable ties)

[Boganspeed]

Those clamps do look nice.

Pricey, but nice.

[masda74]

GeGe6, how much and where from? Some sellers on fleabay are asking $17 each.

[GeGe6]

Got mine from Coventry's about the same price.

I did get them to express post and had them in two days.