discostig Manual mode ________________________ All day, erryday Legacy Donating Member 13,798 Member For: 18y 8m 22d Gender: Male Location: Probably above atmospheric pressure Posted 07/11/13 12:47 PM Posted 07/11/13 12:47 PM That (autospections) sounds like what you want from an inspection! full on.
skidxr6t skids Legacy Donating Member 2,754 Member For: 13y 7m 18d Gender: Not Telling Posted 07/11/13 01:16 PM Posted 07/11/13 01:16 PM Will report back if I endup checking that 6spd manual fg out tomorrow.
The Kerb Warrior Legacy Donating Member 612 Member For: 13y 10m 21d Gender: Male Location: Perth, Western Australia Posted 07/11/13 02:09 PM Posted 07/11/13 02:09 PM Sorry guys I didn't really have much of a look lol, was just making a general point.
skidxr6t skids Legacy Donating Member 2,754 Member For: 13y 7m 18d Gender: Not Telling Posted 12/11/13 11:56 AM Posted 12/11/13 11:56 AM (edited) fingers crossed I get finance, signed up for a 2008 g6et. Edited 12/11/13 11:58 AM by johnxr6t
arronm Dropping a turd Legacy Donating Member 9,520 Member For: 18y 9m 20d Gender: Male Location: Perth Posted 12/11/13 12:54 PM Posted 12/11/13 12:54 PM G Day all,Chasing a set of tyres for the G6E.Anyone got any recommendation on best place to purchase in Perth.Not sure on brand going to hit the search function and do some research but after 245 or 255 19 35 for the street.Oh and don't have a lot of time as the Dunlop's are in a bad state....just how did that happen Sent from my iPad using TapatalkSorry dude,Got your PM.I would go Kumho KU31. 245/35 front and 255/35 rear. Try epic tyres, Tech9 or ebay. Pay about 200 each
GeGe6 Legacy Donating Member 1,980 Member For: 14y 1m 8d Gender: Male Location: Perth, SOR Posted 12/11/13 12:57 PM Posted 12/11/13 12:57 PM All good! Got a set of Nitto Invos fitted up this morning. Found out one of my G6ET Luxe rims has a buckle, not good..:(
#96 Member 281 Member For: 13y 8m 21d Posted 13/11/13 07:22 AM Posted 13/11/13 07:22 AM Nice experience at ford today (nuford)Noticed oil around the diff and suspension area, and having warranty, took it in for a look. Guy eyeballing the car wasn't sure, ans asked when I wanted to book it in. Not wanting it off the road for long, I asked if they could at least try to diagnose the fault now, so the parts were waiting fir next time. Straight out the back, and up she goes. No problems, just being driven a bit hard and spitting out of the breather So, they cleaned it all up for me, and checked the level. Cheers. Any solutions to keep that oil in check? Dont know how it breathes, but can it be fitted with a hose in a loop configuration or similar?
Z2TT Member 714 Member For: 14y 2m 20d Posted 13/11/13 05:16 PM Posted 13/11/13 05:16 PM (edited) Spotted Blue BA/BF GT Wanneroo Road around Balcatta Area about 9-10PM, What mods are you running? Edited 13/11/13 05:17 PM by Z2TT
arronm Dropping a turd Legacy Donating Member 9,520 Member For: 18y 9m 20d Gender: Male Location: Perth Posted 13/11/13 11:08 PM Posted 13/11/13 11:08 PM Has anyone got advice on changing front wheel bearings on a BA falcon. I know I need a 35mm socket. Can I reuse the nuts. Will a 1/2 inch rattle gun undo the nuts. Any ideas
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 10m 23d Gender: Male Location: Perth Posted 13/11/13 11:39 PM Posted 13/11/13 11:39 PM Didn't you get my Pm?35mm is an odd size, I would be tiping it's 36mm. I can lend you a socket in a pinch.PDF attached Page 13. No mention of replacing the nut. You'll need a decent torque wrench to retorque the wheel nut. A good clean up with carbi/lectra clean and some thread lock and you'll be good.I doubt you'll need a puller the bearing is not a press fit. Try and do it while the car is warm.204-01 Front Suspension.pdf
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now