Wanna Be Able To Launch A Manual Like This?

[camo86T]

Got my thread mining hi viz gear on.

 

Anything come of this unit?

Edited 31/08/17 12:35 AM by camo86T
changed word cos too much gear

[JETURBO]

There's a few things available now days but the catch always is how vicious it is on the driveline and how un reliable it makes the car when using the 2steps/boost off the line features etc etc 

[camo86T]

Fair enough

Maybe I'll just work on my shift speed then....

[MaStars]

of maybe get a ZF6

[eff xr6t]

Joe has done quite a few but like Jet said will break sh*t. Most off the shelf twin plate solid centre ceramic clutchs will not put up with it and clutch builders reccomend running sintered iron plates if you want to use a 2 step.

This is a log from my last run at the drags a couple of months ago twin ceramic discs with 2900lb of clamp and was struggling.



Launch set at 3800rpm and leaves with about 12psi and slips hard till it gets some super hot and grabs hold. Have a another set of sintered iron plates, clutch cover and floaters now and will setup a new clutch line with a hydraulic slow release bleed.

Is good fun for powerskids though roll along at 40kmh in 4th clutch it bang bang bang let it rip instant smoke show.

[sixman]

Lol, my single plate organic will have no chance then!

 

Nice data, thanks for sharing.

[camo86T]

20 minutes ago, MaStars said:

of maybe get a ZF6

 

Where's the skill in that...  

[Puffwagon]

The skill lies in the tuning of the car/box.

 

A stock tuned zf equipped car just shuts the throttle when you try to brake boost it at a standstill. 

[JETURBO]

What ECU is that data log from EF ? 

 

Clutch is definitely not loving life there 

[eff xr6t]

Link G4+

Definitely wasn't enjoying it but still enough for a slow shifting 1.60 60ft and 10.90 pass haha