Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 10m 28d Gender: Male Location: Perth Posted 07/10/15 11:45 PM Posted 07/10/15 11:45 PM Skids? 3
JETURBO ...JD TUNING ADELAIDE... Legacy Donating Member 23,708 Member For: 18y 2m 20d Gender: Male Location: Adelaide Posted 08/10/15 01:41 AM Posted 08/10/15 01:41 AM 360 degree thrust bearing lol ?How do u like the prodrag 6 CDI coupled with stock coils ?Were going to use the prodrag 6 but M&W standalone coils and lead combo What boost is it going to run ?
Lennox Member 2,586 Member For: 13y 5m 25d Gender: Male Location: Perth Posted 08/10/15 01:44 AM Posted 08/10/15 01:44 AM Would not want to see bill for parts list. Holy shiz 1
Tocchi Sandtrap Motorsport Legacy Donating Member 2,055 Member For: 17y 8m 26d Gender: Male Location: Perth Posted 08/10/15 01:51 AM Author Posted 08/10/15 01:51 AM 360 degree thrust bearing lol ?How do u like the prodrag 6 CDI coupled with stock coils ?Were going to use the prodrag 6 but M&W standalone coils and lead comboWhat boost is it going to run ?360 degree thrust bearing -- haven't looked into it, I have never had a built Barra before, could you quickly fill me in on that please?The prodrag6 works GREAT with the stock coils. There are lightening bolts coming out ! It ran 28psi on the old tech T51 (journal bearing), 5900rpm limiter, methanol, glide & stall, slicks & 9" on dyno... pumped out 680hpWith this new setup, we will aim for 500rwhp (so I can learn the new setup and get licenced), will be good for mid 9s, so what would that be, like 15psi on this efficient setup? maybe less ... as it will rev to 7,500rpm ish ?we shall be going for a BIG power figure on the dyno though... if anything, for raceteam advertisement for potential sponsors
JETURBO ...JD TUNING ADELAIDE... Legacy Donating Member 23,708 Member For: 18y 2m 20d Gender: Male Location: Adelaide Posted 08/10/15 02:14 AM Posted 08/10/15 02:14 AM Have a word to luke as he will fill u in on the bearing and why you will need it Interesting indeedLooks like were going for a promod91 ( maybe ) so were ideally under 30psi but need that super clean spark also Might keep the stock coils in mind to try first
Tocchi Sandtrap Motorsport Legacy Donating Member 2,055 Member For: 17y 8m 26d Gender: Male Location: Perth Posted 08/10/15 02:27 AM Author Posted 08/10/15 02:27 AM Luke messaged me I need it ... so I most certainly need it hahaany idea of the going rate for them? or who manufactures them?oh that is a big dirty turbo at a lot of psi :D
Tocchi Sandtrap Motorsport Legacy Donating Member 2,055 Member For: 17y 8m 26d Gender: Male Location: Perth Posted 08/10/15 02:35 AM Author Posted 08/10/15 02:35 AM http://youtu.be/o1FDbqNtkWIVery helpful video - I'll SMS brad now :)0
JETURBO ...JD TUNING ADELAIDE... Legacy Donating Member 23,708 Member For: 18y 2m 20d Gender: Male Location: Adelaide Posted 08/10/15 09:25 AM Posted 08/10/15 09:25 AM Hope I helped as were going through it now also on another build 1
Skids4kids in the mid....not the bum like some Member 609 Member For: 13y 3m 28d Gender: Male Posted 08/10/15 10:24 AM Posted 08/10/15 10:24 AM I had the 360 fitted to my engine its for cars with high stalls and when loading converter for extended periods of time.It use to be a factory fitment but was stopped after the EL Falcon.You can also get a extra side main cap bolt fitted so each side has 5 of them.....Brad can enlighten you more also on this. 2
Tocchi Sandtrap Motorsport Legacy Donating Member 2,055 Member For: 17y 8m 26d Gender: Male Location: Perth Posted 08/10/15 01:00 PM Author Posted 08/10/15 01:00 PM Brad has got back to me, very pleasedAlways has time to answer questions. Total champ. 4
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now