Fg Turbo Current Top 50

[FPVPSI]

is this thing black in colour

[JETURBO]

chuck mine in gimps

11.75 @120mph @ heathcote park raceway s.a all the way hahahha

Edited 11/04/11 10:28 AM by JETSNOT

[Corzza]

Valve springs are in and im ready to have another crack on street tyres 1st.

Then il chuck some slicks on the back to see how close I can get to the 10's

[JETURBO]

hey corzza why did u only run a 119mph with the power u got?

I had a std cooler on mine hence why it went sh*t house on the 2nd half track what was up with urs?

[BAjoe]

you got 11.75 with 421rwkw @ 120mph. He got 11.9 @ 119mph with 402rwkw.

BAs are getting 10s with 375rwkw @ 126+mph.

Someone needs to fill in the rest.

[Corzza]

@ Jetsnot When I ran that time I was getting bad Valve float up to. I have since replaced my valve springs with atomic ones.

This should now allow me to get my top end up. 3/4 of the way down the 1/4 mile it felt like my car hit the brakes.

My biggest issue is my 60' which I could not bring lower than 2.075. If I can get this down to 1.8 im sure il be in the mid to low 11's.

Another thing to note this is all on 98 octane and street tyres.

[riki83]

BA had a 4speed. easier to get better times

[JETURBO]

wow I thought springs in these were good as done justa bad set or typical at this power?

[Corzza]

Depends really. But 400rwkw seems to be their limit.

[Corzza]

I ran 11.9 all night last night @ WSID on my dunlops. I could not crack into the 1.9 60'

My best 2.08. I need to learn how to stall the bugger.