The Plastidip Thread.

[M_crisp]

Plasti dipped my twisties black on the phoon today.

I actually found it better to do with the wheels still on the car and just cover up everything in there.

This is how it turned out.

I think it looks pretty cool

[Bellato]

Yea twisities look way better black!

I love this stuff, can do so much with it and remove it if you don't like it.

[Bigkeels]

does anyone know if you can get a plastidip almost the same colour as the standard ford silver rim colour, like lux packs and so on

[#96]

chasing advise from anyone who has done their "XR6" badges on the skirt/door

have done my rear badges with ease, but every time I try to do the "XR6" on the side, peeling back the excess doesn't tear like it should, and it also peels off of the badge.

I suspect this is because the badges are much slimmer, and there isn't such an obvious line for it to break on.

tips or advice on how to do these?

[M_crisp]

Cut the edge with a knife?

[#96]

considering it... would get a scalpel from a hobby shop so its sharp as #### but just very concerned about running it through the paint.

[Bellato]

chasing advise from anyone who has done their "XR6" badges on the skirt/door

have done my rear badges with ease, but every time I try to do the "XR6" on the side, peeling back the excess doesn't tear like it should, and it also peels off of the badge.

I suspect this is because the badges are much slimmer, and there isn't such an obvious line for it to break on.

tips or advice on how to do these?

I would just peel it off and start again! Just do really really light coats (should take 5 or 6 coats before it even covers it completely). Do 15-20 coats like that and should cut itself properly

does anyone know if you can get a plastidip almost the same colour as the standard ford silver rim colour, like lux packs and so on

Nope! You can get grey which is darker but that's it. Have a look on the main plastidip website, they have all the colours on there

[Panda Eyes]

matt black twisties look sweet as..

[Kroozin]

Wanting to do this

I've got the spray.

How would I leave a "clean edge"?

I've seen how on sharp corners etc it pretty much cuts itself but what about when there's no edge like this?

Edited 29/05/13 01:56 PM by Kroozin

[Dagabond]

Like what....

...masking tape.