daztbo FLY-FPV Legacy Donating Member 474 Member For: 17y 8d Gender: Male Location: Greensborough Vic Posted 14/05/12 12:06 PM Posted 14/05/12 12:06 PM Sounds good gaz hopefully we get a few people attending
daztbo FLY-FPV Legacy Donating Member 474 Member For: 17y 8d Gender: Male Location: Greensborough Vic Posted 14/05/12 12:15 PM Posted 14/05/12 12:15 PM Ok just a few things I have up my sleeve that's comes in handy 1. Tighten manifold bolts 2. Lube and clean boost solinoid actuator 3. Change spark plugs + coils 4. Change tps + reset tps 5. Change engine oil + filter 6. Change fuel filter7. Clean throttle body 8. Block of bov to make flutter 9. Clean aircon filter 10. Clean or replace fuel pressure reg11. Replace brake pads + rotors + bleed brakesPlus there is a heap more like installing mods eg New cooler Injectors Fuel pump Exhaust cat and dump pipe ActuatorRelocate battey to boot or passenger side so turbo side air box can be fittedDose pipesPlenums And pretty much anything
Shyfrd Turboless Legacy Donating Member 5,992 Member For: 15y 5m 9d Gender: Male Location: Geelong, Victoria Posted 14/05/12 12:19 PM Posted 14/05/12 12:19 PM Sounds good to me! I'll be there with bells on and try keep all the info in the memory bank! LolWhere abouts would it be held? Central location for everyone attending or a known quite park/car park on weekends? Will be good to get the first day down and done and use it to go from there for the next
EvilDaifu Cruise Whore Moderating Team 5,130 Member For: 20y 11m 30d Gender: Male Location: Melbourne Posted 14/05/12 12:25 PM Author Posted 14/05/12 12:25 PM To be confirmed but we are looking at Westfolds Park in Templestowe. I've updated the first post
BFXR6TURBOMAN Legacy Donating Member 80 Member For: 14y 2m 30d Gender: Male Location: Melbourne, Victoria Posted 14/05/12 01:07 PM Posted 14/05/12 01:07 PM Hi guys and gals, this is a really good idea ive only been into the turbo scene for 3 years most of the work done on my car wasnt done by me lol oops, but in my own defense I can change plugs and pollen filter behind the glove box and clean my K&N filter thas about it, the rest well im not so sure about. I would like to come for the DIY, but I have to be put down as a maybe, I will know more towards the end of the week, cause I might have to help a friend out at his pizza shop dont know for sure yet...
Mura Back Again.. Legacy Donating Member 281 Member For: 15y 10m 29d Gender: Male Location: Geelong, Victoria Posted 14/05/12 09:08 PM Posted 14/05/12 09:08 PM Hey Gary I think it's too late notice :(
EvilDaifu Cruise Whore Moderating Team 5,130 Member For: 20y 11m 30d Gender: Male Location: Melbourne Posted 15/05/12 12:18 AM Author Posted 15/05/12 12:18 AM Yeah that's the risk - but this Sunday looks like the only sunny day for next lot of weekends. Anyways - we'll see who turns up and use it to fine tune subsequent ones
Dillz Three pedals are better then two.. Legacy Donating Member 15,637 Member For: 19y 2m 10d Gender: Male Location: Melbourne Posted 15/05/12 12:26 AM Posted 15/05/12 12:26 AM I'll try and make it, just got to clean my airfilter really but can help out with solenoid/intake etc. People can also have a listen to what it sounds like with center replaced with a hotdog if they're thinking of doing it.
Paulie2256 Legacy Donating Member 7,441 Member For: 17y 8m 14d Gender: Male Location: SE Melbourne Posted 15/05/12 12:40 AM Posted 15/05/12 12:40 AM I need to change my fuel filter so I'll come along. Also, anyone coming done valve springs before?
daztbo FLY-FPV Legacy Donating Member 474 Member For: 17y 8d Gender: Male Location: Greensborough Vic Posted 15/05/12 01:26 AM Posted 15/05/12 01:26 AM Lol u need the sPecial tool mr 2256 for valve springs lol
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now