Puffwagon Legacy Donating Member 16,348 Member For: 11y 6m 5d Gender: Not Telling Posted 23/03/21 08:18 AM Posted 23/03/21 08:18 AM Apparently they are good for about 220wkw before they let go.
k31th less WHY; more WOT Site Developer 30,020 Member For: 18y 3m 24d Gender: Male Location: Melbourne Posted 23/03/21 08:27 AM Posted 23/03/21 08:27 AM triple the output... yikes.... that means about 800kw (triple a stock FG XR6T) for Barra haha
Puffwagon Legacy Donating Member 16,348 Member For: 11y 6m 5d Gender: Not Telling Posted 23/03/21 08:32 AM Posted 23/03/21 08:32 AM Yeah power to weight at 220 is about 400 in a falcon so it'll be quick. I can see a built motor in the future lol
Wyatt Legacy Donating Member 70 Member For: 7y 12d Gender: Male Location: Cairns Posted 23/03/21 12:23 PM Posted 23/03/21 12:23 PM (edited) 7 hours ago, biddie_fiddler said: Not to say this can't be a complete DIY job. Plenty of people have done this themselves. You can get decent results using 2k paints (primer, base, top coat). My brother and I did his completely DIY using rattle cans. Ended up costing around $200 in paint, it was all 2k (2 pack primer, base and top coat). I paid $250 for the rocker cover to be powder coated in a blue with chameleon top coat so all-in-all pretty great value. Thanks @biddie_fiddler Not a lot of difference in the end price and a lot less work for you if prep was included in price. I think I like it without the coil cover as well. You made the catch can arrangement very neat and engine bay looks smicko Edited 23/03/21 12:29 PM by Wyatt
biddie_fiddler [IMPULSIV3] Legacy Donating Member 1,374 Member For: 7y 4m 5d Gender: Male Location: Perth, WA Posted 23/03/21 11:58 PM Posted 23/03/21 11:58 PM I actually put the cover back on lol. I needed to cut the hole for front breather a little bigger to fit the 90° AN fitting and I didn't have a step drill bit to get it done easily. Quick trip to bunnings sorted out the problem. Another issue I had was that the VCT connector plugs both sh*t the bed and broke. I ordered some new ones while the second rocker cover was getting powder coated. Fixed this before I put the coil cover back on. Easy job to de-pin the connectors. Took about 2min per connector to de-pin the old housing and re-pin the new ones.
biddie_fiddler [IMPULSIV3] Legacy Donating Member 1,374 Member For: 7y 4m 5d Gender: Male Location: Perth, WA Posted 30/03/21 01:21 AM Posted 30/03/21 01:21 AM Removed the cigarette lighter and replaced it with a USB quick charge port. Has a type C port on it! So futuristic and sh*t. Also has a voltmeter integrated. Not sure I like that part but overall fit and finish is amazing. Photo doesn't do it justice, looks like its not in straight but trust me I made sure it was square 🤣🤣 With the cover closed it looks almost factory, doesn't stick out like dogs balls. (I need a new shifter boot) Link to it for anyone curious 4
bupalooga Legacy Donating Member 262 Member For: 13y 9m 28d Gender: Male Location: Griffith NSW Posted 02/04/21 03:33 AM Posted 02/04/21 03:33 AM Got my gvm upgrade yesterday, I'm now officially & legally a turbo one tonner. 4
k31th less WHY; more WOT Site Developer 30,020 Member For: 18y 3m 24d Gender: Male Location: Melbourne Posted 02/04/21 03:47 AM Posted 02/04/21 03:47 AM now an official work hack instead of just a work hack? 1
bupalooga Legacy Donating Member 262 Member For: 13y 9m 28d Gender: Male Location: Griffith NSW Posted 02/04/21 04:40 AM Posted 02/04/21 04:40 AM All the better for tax claiming new turbos with my dear! 1
k31th less WHY; more WOT Site Developer 30,020 Member For: 18y 3m 24d Gender: Male Location: Melbourne Posted 02/04/21 05:59 AM Posted 02/04/21 05:59 AM
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now