Jump to content

Recommended Posts

  • Legacy Donating Member
  • Member For: 15y 15d
  • Gender: Male
Posted

Yeahhh he said he's ported it out more and welded the bush so the flap should stay now. Hope all goes well now that gtx costed me $1650 with the boost nipple and this new one costed me all up $1640 no nipple :/ but I got the housing ported and all assembled with my actuator and bracket all done so can't complain just can't wait to inspect the port job....hopefully it's good.

  • Legacy Donating Member
  • Member For: 15y 10m 6d
Posted

Got a wheel alignment for $66! Cheering on the price! And although most people would say cheap isn't good, they spent 3 hours adjusting all my camber, toe etc! Very happy with the job

  • Legacy Donating Member
  • Member For: 21y 1m 18d
  • Gender: Male
  • Location: OZ
Posted

yep at 0.6 u sure do get a perfict idle

Sarcasm much. I struggled with a slight miss at ir for ages until I cracked the $h1ts and bought the tuning software to look into it more.

Is your idle timing steady, and if so what are you seeing? What squirters are you using?

  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 2m 25d
  • Gender: Male
  • Location: Adelaide
Posted

I was only being a sack lol

Running 60lb dekas but around 21psi up top so had to close the gap down to approx 0.6mm but sacrifice idle quality

Just the way it is at that gap

  • Legacy Donating Member
  • Member For: 21y 1m 18d
  • Gender: Male
  • Location: OZ
Posted

I know, all good :P

0.7 is usually fine at that boost?

Keep an open mind :-)

  • I see a red door and I want to paint it black
  • Legacy Donating Member
  • Member For: 16y 10m
  • Gender: Male
  • Location: Far north queensland
Posted

Yeahhh he said he's ported it out more and welded the bush so the flap should stay now. Hope all goes well now that gtx costed me $1650 with the boost nipple and this new one costed me all up $1640 no nipple :/ but I got the housing ported and all assembled with my actuator and bracket all done so can't complain just can't wait to inspect the port job....hopefully it's good.

not taking the piss, but could you tell if the port job was up to scratch?

  • Legacy Donating Member
  • Member For: 15y 15d
  • Gender: Male
Posted

I have pictures and comparisons that I have gathered from this lovely site, also I'm going to post pics up once I get it so yous can give me your opinions :)

  • Like 2
  • Turboless
  • Legacy Donating Member
  • Member For: 15y 5m 29d
  • Gender: Male
  • Location: Geelong, Victoria
Posted (edited)

Installed new aux cable from under the dash to the gap underneath the cig lighter. Have an android now so if I ever want to play something from that I can use the 3.5mm jack off the end of the aux cable. EBay job..$25

Also can charge and play iPod at same time. The cable I had prior charged and played for first 2wks and no more charge. Checked fuse in it, everything. Donuts. Got it exchanged. Same thing again...left it ever since. About 2yrs ago lol. 2 cogs off eBay ~$40 or so

3etuny5e.jpg

And just finished putting a new cog in the door lock. Put that little black sleeve in the wrong way first time. Door was still unlocking from outside..I wasn't happy lol. Then realised my mistake when took it apart :P pic of the old pos one lol

daba8yge.jpg

post-45196-13489094103_thumb.jpg

Edited by Shyfrd
  • Member
  • Member For: 22y 6m 12d
  • Gender: Male
  • Location: Melbourne
Posted (edited)

PW stepped cooler

post-3463-0-90390400-1349101255_thumb.jp

Edited by FG50T

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...