PhilMeUp Member 1,045 Member For: 18y 18d Gender: Male Location: Perth, Western Australia Posted 05/05/15 03:02 PM Posted 05/05/15 03:02 PM Rear left wheel bearing went today! [emoji35][emoji35][emoji35]Anybody have any tips or recommendations ?I know nothing about sedans - only dealt with utes and wagons.But I've found with the front bearing hubs that the Ford ones last longer than the aftermarket stuff.Do some searching on eBay and you'll find listings on there. Find the part number, and then do a search for that.One of the cheaper options is from Jefferson Ford, which is in Melbourne somewhere (ie your info says that you're in Melbourne).
Phoon508 Member 188 Member For: 13y 7m 26d Posted 09/05/15 01:04 AM Posted 09/05/15 01:04 AM looks nice mate, what products, machine, pads? Did you use.I used auto glym super resin polish with the hand applicator pads (fabric ones seem to work better than the sponge ones). Great stuff! Did two coats per panel and three coats on the roof, boot and bonnet. It repels water so well now that even in this sh*t weather that we have been seeing in Melbourne, my car still looks spotless. The paint was already in good condition so I didn't have to use a cutter. But if your paint is feeling a bit 'rough' I highly recommend the meguires fine cutter before the polish. I usually use the mothers wax that comes in the round tin after the polish. But last Sunday I got lazy and went for a drive instead as waxing is another whole day job.
gaz097 Legacy Donating Member 1,752 Member For: 15y 14d Posted 09/05/15 08:36 AM Posted 09/05/15 08:36 AM Fitted my clutch. f*ck it has some bite 2
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Legacy Donating Member 1,808 Member For: 17y 7m 19d Gender: Male Posted 09/05/15 11:18 AM Posted 09/05/15 11:18 AM replaced my bump stops and rear swaybar links, and also swapped the 22mm whiteline swaybar out and put the stock one back in. also, I picked up the turbo manifold from Competition Coatings looking all nice and black. 3 day turn around from them exceeded expectations but still waiting on some Technico mounts.
k31th less WHY; more WOT Site Developer 30,020 Member For: 18y 3m 25d Gender: Male Location: Melbourne Posted 09/05/15 11:20 AM Posted 09/05/15 11:20 AM Fitted my clutch. f*ck it has some bitewhat make/model is it?
gaz097 Legacy Donating Member 1,752 Member For: 15y 14d Posted 09/05/15 11:39 AM Posted 09/05/15 11:39 AM Xtreme twin plate ceramic Keith.
k31th less WHY; more WOT Site Developer 30,020 Member For: 18y 3m 25d Gender: Male Location: Melbourne Posted 09/05/15 11:44 AM Posted 09/05/15 11:44 AM sweet - I've heard they bite pretty farkin' hardpics?
gaz097 Legacy Donating Member 1,752 Member For: 15y 14d Posted 09/05/15 12:36 PM Posted 09/05/15 12:36 PM Before it went it. So far it's stupid. Turns tyres so easy. Will break something pretty quick 2
k31th less WHY; more WOT Site Developer 30,020 Member For: 18y 3m 25d Gender: Male Location: Melbourne Posted 09/05/15 12:41 PM Posted 09/05/15 12:41 PM looks sticky
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 10m 12d Gender: Male Location: Perth Posted 09/05/15 04:02 PM Posted 09/05/15 04:02 PM You'll probably need the tune touched up. A grippier clutch brings the load in sooner and does funny things to the load points.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now