BeerTurbo Legacy Donating Member 241 Member For: 8y 3m 27d Posted 05/06/19 12:08 AM Posted 05/06/19 12:08 AM rocker off, might as well do the valve-springs, might as well bolt in some head studs, do everything.
Puffwagon Legacy Donating Member 16,348 Member For: 11y 7m 6d Gender: Not Telling Posted 05/06/19 12:17 AM Posted 05/06/19 12:17 AM I spose I could. I've got some head studs with os washers and valve springs I can chuck in.
arronm Dropping a turd Legacy Donating Member 9,520 Member For: 18y 10m 9d Gender: Male Location: Perth Posted 05/06/19 07:54 AM Posted 05/06/19 07:54 AM 12 hours ago, Puffwagon said: Dindu nuffin today but since I put the 4 inch turbo intake on, it's started sucking oil out of the rocker cover through the breather hose, on decel after boosting. I spose a rocker cover mod or a catch can arrangement is in order. I bet it's sucking through pcv valve. Just throw catch cans on both circuits. The pcv is the worst. 11 hours ago, BeerTurbo said: rocker off, might as well do the valve-springs, might as well bolt in some head studs, do everything. Rocker off. Check cam lobes.
Puffwagon Legacy Donating Member 16,348 Member For: 11y 7m 6d Gender: Not Telling Posted 05/06/19 08:04 AM Posted 05/06/19 08:04 AM It's through the one in the middle. Blergh I don't think I want to check cam lobes
Slowxr6t Member 592 Member For: 7y 9m 1d Location: New zealand Posted 07/06/19 06:58 AM Posted 07/06/19 06:58 AM Took off plastic rocker cover guard to see what the story is to weld on some big dog Earl's 15mm I d 90 degree bends onto breather outlet and pcv outlet to run some 19mm push loc hose to a catch can and vent it to under the car with a length of 32mm vacuum cleaner hose that bends round corners quite nicely. The can will be passenger side up by firewall. The breather vent hole on the rocker cover is a small 10mm or so and the pcv hole is a big 20mm ish. I will take rocker cover off and drill out the breather hole then get an engineer to tig on the alloy fitting to the rocker cover and the Earl's bend screws on it once plastic cover is back on top. Luckily there's plenty of room between the top of engine and bonnet to fit these fittings. The beast will be free to breath with no crap pcv to worry about. Simple as! We can get away with this in nz.
BeerTurbo Legacy Donating Member 241 Member For: 8y 3m 27d Posted 07/06/19 07:00 AM Posted 07/06/19 07:00 AM I think we need a picture
tazzanz Legacy Donating Member 573 Member For: 11y 1m 4d Gender: Male Location: NZ Posted 07/06/19 12:18 PM Posted 07/06/19 12:18 PM Scored some BA XR8 18’s for cheap with decent tyres 7mm plus. Always good to have some rims spare that clear brembos. 2
k31th less WHY; more WOT Site Developer 30,020 Member For: 18y 4m 26d Gender: Male Location: Melbourne Posted 08/06/19 04:59 AM Posted 08/06/19 04:59 AM washed it for the first time in ages since it'd been raining pretty much a bit every day for ages
Puffwagon Legacy Donating Member 16,348 Member For: 11y 7m 6d Gender: Not Telling Posted 08/06/19 06:18 AM Posted 08/06/19 06:18 AM Post some pics ya slacker
k31th less WHY; more WOT Site Developer 30,020 Member For: 18y 4m 26d Gender: Male Location: Melbourne Posted 08/06/19 06:37 AM Posted 08/06/19 06:37 AM here ya go: 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now