How Are The G6E Turbo's Going Down The 1/4 Mile

[g6e-psi]

so all is good out there !!

My turbo is a gtx35r

my 60 fts were 1.8 to 2.3 I cant stall it up it just wants to spin the sreet slicks so thinking of doing a stall but not 100%

I broke my rear jack shaft on the line was on the hand brake and before I could take off snap rite in the middle of the rear of the tail shaft

I thought it would of busted at the uni's but they held up.

just waiting to do the valve springs then will take it for another run

im trying to run a 10 and have a daily driver out of it hope I can but only time will tell

[Panda Eyes]

are you guys on lsd's or single spinners?

[AirStrike]

so all is good out there !!

My turbo is a gtx35r

my 60 fts were 1.8 to 2.3 I cant stall it up it just wants to spin the sreet slicks so thinking of doing a stall but not 100%

I broke my rear jack shaft on the line was on the hand brake and before I could take off snap rite in the middle of the rear of the tail shaft

I thought it would of busted at the uni's but they held up.

just waiting to do the valve springs then will take it for another run

im trying to run a 10 and have a daily driver out of it hope I can but only time will tell

Hahaha mine did the exact same thing. Stalled up on the handbrake, shaft twisted in the centre and then broke the rear uni.

My effort:

[Paulie2256]

inb4 video of johnny

[G6ET8U]

A cracking good job you did on yours too Dave!

are you guys on lsd's or single spinners?

Harrop TruTrac here...

Jack

Edited 24/09/12 07:21 AM by G6ET8U

[Henz]

inb4 video of johnny

Belongs in Agwbabr.

[AirStrike]

F6 LSD in mine.

[g6e-psi]

mine is a full change so I could put a strengthend and bigger tail shaft,

running full preston auto's lsd with 3.46 gears that me and andrew have decided with after talking bout what I want the car to do.

its been a tough time with the car but once the little bugs are sorted it should do the time.

now I have to find the right slick and front runner combo (wheels and tyres) if any one has ideas would help as I dont want a stall yet

I wanna 10sec pass with standerd auto and the street slicks arnt holding the car to well after the 3.46's were put in the standerd stall has dropped and at 1700 rpm it starts turnng the tyres.

[g6e-psi]

11.48 @ 123 so far.

The plan is now on for a 10 sec daily driver

Jack

what power you got if you dont mind me asking???

[g6e-psi]

this is my tailshft[attachment