Jump to content

Recommended Posts

  • Member
  • Member For: 22y 1m 22d
  • Gender: Male
  • Location: Mackay NorthQueensland
Posted

Well I ran my car up at Townsville dragway last night,

got a new pb of 11.3 122mph,

this was run in the afternoon,

I expected it to go better in the night when it was cooler, but the traction seemed to get worse, and she just spun the tyres as soon as I tryed to launch harder.

but still had fun, and the car done its 600k round trip without needing a tow truck, so I am happy,

going to try a new pb for my car again at the end of the month in Mackay, and then I am going to get the auto done up and upgrade the motor to.

so it will be my last go at what I can get out of the stock internals up here.

David

  • Formerly XR6NA
  • Member
  • Member For: 20y 7m 19d
  • Gender: Male
  • Location: Brisbane
Posted

Well done awesome time. What was the temp. Isn't the record for stock internals 11.1?

  • Member
  • Member For: 22y 1m 22d
  • Gender: Male
  • Location: Mackay NorthQueensland
Posted
Well done awesome time. What was the temp. Isn't the record for stock internals 11.1?

yes the record is 11.1

going to try for it but they keep moving the goal posts

the temp was about 25degrees when I ran it but I did not check.

David

  • Member
  • Member For: 20y 2m 10d
Posted

Nice work on the 11.3. Got to be happy with that result. I am in mackay and just wanted to know when you will be here? I heard through the grapevine (friend) that you do all your own tuning through the SCT software? If so I might need you to have a look to see what you can do for me.

Regards

Jay

  • Member
  • Member For: 22y 1m 22d
  • Gender: Male
  • Location: Mackay NorthQueensland
Posted
Nice work on the 11.3. Got to be happy with that result. I am in mackay and just wanted to know when you will be here? I heard through the grapevine  (friend) that you do all your own tuning through the SCT software? If so I might need you to have a look to see what you can do for me.

Regards

Jay

HA HA you wouldn't have a friend,must have been the grapevine :laughing:

  • Member
  • Member For: 22y 1m 22d
  • Gender: Male
  • Location: Mackay NorthQueensland
Posted
Nice work on the 11.3. Got to be happy with that result. I am in mackay and just wanted to know when you will be here? I heard through the grapevine  (friend) that you do all your own tuning through the SCT software? If so I might need you to have a look to see what you can do for me.

Regards

Jay

HA HA you wouldn't have a friend,must have been the grapevine :laughing:

and yes Jay, I will be down at the end of the month, can't waite to check out your auto, did you make the deal on the other one?

  • Member
  • Member For: 20y 2m 10d
Posted

auto is good. Really good! No go with the other auto yet. Should get my 4" exhaust this week. Very keen to fit.

  • 1 month later...
  • Legacy Donating Member
  • Member For: 21y 8m 25d
  • Location: Melbourne
Posted

Hi all

Ran at Calder park last night best time of 12.760 , was a little dissapointed considering the power I'm making.

Any thoughts would be appreciated.

60ft 2.111

660ft 8.353

mph 89.11

ET 12.760

MPH 110.90

  • Faster than any BTA,XTC,Autotech, Nizpro and Tunehouse car
  • Member
  • Member For: 23y 27d
  • Location: D SHIRE!
Posted
Hi all

Ran at Calder park last night best time of 12.760 , was a little dissapointed considering the power I'm making.

Any thoughts would be appreciated.

60ft  2.111

660ft 8.353

mph  89.11

ET 12.760

MPH 110.90

Manual or auto?

  • Here since the start...
  • Legacy Donating Member
  • Member For: 23y 2m 23d
  • Gender: Male
  • Location: Victoria
Posted

It's an auto.

I've ran a heap of passes with about the same results as yours, at the time I had 250rwkw's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...