Tocchi Sandtrap Motorsport Legacy Donating Member 2,055 Member For: 17y 8m 6d Gender: Male Location: Perth Posted 24/04/15 04:47 AM Posted 24/04/15 04:47 AM (edited) Anybody wanting to swap a 3540 for a 3576 ?You keep your rear housing.Was told it was in good condition when removed for a precision 6466 Edited 24/04/15 04:48 AM by Tocchi
masda74 To Loud Legacy Donating Member 4,114 Member For: 14y 8m Gender: Male Location: WA, Perth Posted 24/04/15 05:15 AM Posted 24/04/15 05:15 AM Nope, wasn't me. I was in guildford at 07:23am on my way to work.decisions, decisions, decisions.
Tocchi Sandtrap Motorsport Legacy Donating Member 2,055 Member For: 17y 8m 6d Gender: Male Location: Perth Posted 24/04/15 08:26 AM Posted 24/04/15 08:26 AM Pipe work - Sounds goodOk I've sorted my pipe work, picked up FG stuff today.If you want, I'll do all of this stock piping for what I paid $100
discostig Manual mode ________________________ All day, erryday Legacy Donating Member 13,798 Member For: 18y 8m 6d Gender: Male Location: Probably above atmospheric pressure Posted 24/04/15 09:22 AM Posted 24/04/15 09:22 AM thought it was him.... Guy can drive. Over on AL they love to call R35s soulless computers that don't need a driver. They often sound like arse too. Still wouldn't say no to one, would love to flog the tits off it around the burbs between jobs daily hahaha
Lennox Member 2,586 Member For: 13y 5m 4d Gender: Male Location: Perth Posted 24/04/15 09:30 AM Posted 24/04/15 09:30 AM You still have to steer and brake the thing.. just has awesome traction control and auto gearboxYou should feel the launch control in em...intense
Boganspeed Will do skids for food Legacy Donating Member 1,177 Member For: 14y 8m 26d Gender: Male Location: Perth SOR Posted 24/04/15 09:51 AM Posted 24/04/15 09:51 AM There is no need for a aftermarket flex plate the fault does not lie in the flex plate it lies in the way it is attached.Ive wondered if, before it failed, you were to replace the bolts with arp bolts and loctited them, or even the oem bolts, if that would prevent it from happening.If you could do that without dropping the trans, it would be worth it.If you have to pull the box, then you may as well add $250 for a nizzy one.I dont even know if theres an inspection cover. Never bothered to look.
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 10m 7d Gender: Male Location: Perth Posted 24/04/15 10:12 AM Posted 24/04/15 10:12 AM Box would still need to come out. Bolts loosening off is a symptom not the cause. The issues is the thickness and hardness of the stock plate. The torque from the engine distorts the metal on the loaded side of the plate and once the plates hole are no longer a tight fit on the bolts its starts to move under load and its all over.Early bfs had issues with not loctite on the bolts and it would effect even stock cars bf2 on,the plate is the issue. 1
TaHa Member 948 Member For: 18y 2m 8d Gender: Male Posted 24/04/15 10:45 AM Posted 24/04/15 10:45 AM Hey Matt, I found something today that suited my needs perfect. I wont need to butcher up the stock one anymore. Thanks again for the offer though man! 1
Tocchi Sandtrap Motorsport Legacy Donating Member 2,055 Member For: 17y 8m 6d Gender: Male Location: Perth Posted 24/04/15 10:59 AM Posted 24/04/15 10:59 AM No problems man.Mr Skuse will be pleased... Be can get the yellow off lol 1
Tocchi Sandtrap Motorsport Legacy Donating Member 2,055 Member For: 17y 8m 6d Gender: Male Location: Perth Posted 24/04/15 11:00 AM Posted 24/04/15 11:00 AM No problems man.Mr Skuse will be pleased... Be can get the yellow off lol
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now