Boganspeed Will do skids for food Legacy Donating Member 1,177 Member For: 14y 9m 3d Gender: Male Location: Perth SOR Posted 11/02/16 06:28 AM Posted 11/02/16 06:28 AM WAW 17th Feb is Boost Night. Anything boosted gets in to race for $20. Turbo, Supercharged or Nitrous. Probably gunna be a busy night.
masda74 To Loud Legacy Donating Member 4,114 Member For: 14y 8m 8d Gender: Male Location: WA, Perth Posted 11/02/16 06:36 AM Posted 11/02/16 06:36 AM I am hoping to make it out next week Wednesday. The minister of war and finance has given me the go ahead. However I am finding it difficult to source myself a helmet. This is starting to sh*t me to no ends. I have even been practicing my launch assists..... I take it you won't be making it with the ute especially with the issues with the exhaust right?
Boganspeed Will do skids for food Legacy Donating Member 1,177 Member For: 14y 9m 3d Gender: Male Location: Perth SOR Posted 11/02/16 10:11 AM Posted 11/02/16 10:11 AM Exhaust is sorted but I raced the bike last weekend and am racing again next weekend. I'll probably still be there though as my young bloke is about to have his first ride on my GSXR1000 that we're setting up as his drag bike. Also note there is a test and tune on Wednesday 17 for the upcoming top fuel meet so the track will be good.
Lennox Member 2,586 Member For: 13y 5m 12d Gender: Male Location: Perth Posted 11/02/16 11:38 AM Posted 11/02/16 11:38 AM I'm out that day :( good luck. You can get an approved helmet on ebay for 60 bucks. Don't forget to turn tc off for the burnout [emoji14]
PhilMeUp Member 1,045 Member For: 18y 22d Gender: Male Location: Perth, Western Australia Posted 11/02/16 11:42 AM Posted 11/02/16 11:42 AM 5 hours ago, masda74 said: I am hoping to make it out next week Wednesday. The minister of war and finance has given me the go ahead. However I am finding it difficult to source myself a helmet. This is starting to sh*t me to no ends Got a couple of helmets here. What are the requirements?
Boganspeed Will do skids for food Legacy Donating Member 1,177 Member For: 14y 9m 3d Gender: Male Location: Perth SOR Posted 11/02/16 01:34 PM Posted 11/02/16 01:34 PM AS/NZS 1698 helmet is required.
arronm Dropping a turd Legacy Donating Member 9,520 Member For: 18y 9m 12d Gender: Male Location: Perth Posted 11/02/16 01:43 PM Posted 11/02/16 01:43 PM (edited) 7 hours ago, masda74 said: I am hoping to make it out next week Wednesday. The minister of war and finance has given me the go ahead. However I am finding it difficult to source myself a helmet. This is starting to sh*t me to no ends. I have even been practicing my launch assists..... I take it you won't be making it with the ute especially with the issues with the exhaust right? http://www.cullysyamaha.com.au/online_products.php?cat=RRA&grp=HELMETS&brd=&id=7378&clearance=1 http://www.cullysyamaha.com.au/online_products.php?cat=RRA&grp=HELMETS&brd=&id=6423&clearance=1 Edited 11/02/16 01:45 PM by arronm 1
masda74 To Loud Legacy Donating Member 4,114 Member For: 14y 8m 8d Gender: Male Location: WA, Perth Posted 12/02/16 12:07 AM Posted 12/02/16 12:07 AM I just checked this page http://www.motorplex.com.au/wp-content/uploads/2015/11/151120_OFF-STREET-_ROAD-GOING_-VEHICLE-V8.pdf and I could have sworn that there was some sort of requirement for the helmet. I better check my helmet at home first to see if it conforms. I am sure that I have AS/NZS 1698, I will find out tonight. thanks for the links though.
discostig Manual mode ________________________ All day, erryday Legacy Donating Member 13,798 Member For: 18y 8m 14d Gender: Male Location: Probably above atmospheric pressure Posted 12/02/16 06:17 AM Posted 12/02/16 06:17 AM 23 hours ago, eff xr6t said: It's Jordan Scotts mustang built 4l on methanol tuned by bye performance has made 975rwhp though the glide. You have to hold it on the limiter when the turbo is that big a 7675 precision won't just spool again if you get off the throttle. Edit it's has a Facebook page of you wanna check it out 30psi2fry mustang burnout car. I was there watching at gazzanats 2014 when it was white. Was a crowd favourite after people initially laughed at the ten seconds it spent sitting quietly and spooling up. Not sure what he was doing exactly that took so long but once it got going it was loud as FARK. I mentioned it to Simon from XFT as I heard the engine was built by them. Simon confirmed it was but that once it left his shop that was the last he saw of it IIRC. Again this was in 2014 so I don't know what the current engine is. Is it still the same one or was it modified further? On 2/5/2016 at 10:17 AM, Krazy Kyle said: WAW - 2nd of march By popular request on Facebook here is Kyle after taking the ute drag racing
skidxr6t skids Legacy Donating Member 2,754 Member For: 13y 7m 10d Gender: Not Telling Posted 12/02/16 11:05 AM Posted 12/02/16 11:05 AM
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now