IH8TOADS Legacy Donating Member 3,618 Member For: 21y 9d Gender: Male Location: OZ Posted 04/07/18 11:56 AM Posted 04/07/18 11:56 AM (edited) On 27/06/2018 at 12:38 PM, Boosturd said: May be a stupid question, but would anyone be able to answer if I am able to use the derived engine rpm that lies under the Axle Speed in your Dyno graph for my own. I.E is this effected by gearbox and diff ratio? Unfortunately my graph doesn't have this engine rpm displace. At first glance it looks like it would work... Yeah it’s affected by diff, gearbox ratio and slip. Even locked up the ZF has 2% slip. So it’s not accurate like you can calculate with a manual in 1:1 ratio. Find ZF graphs of the same gear (Ie 4th)and then divide the derived rpm by axle rpm and then average this for different rpm values above 4000rpm. Use this ratio for your own car. so say your axle rpm is 1400 and your conversion ratio from other graphs is 3.1 then the engine rpm is approximately 1400x3.1=4340 Edited 04/07/18 11:56 AM by IH8TOADS 2
arronm Dropping a turd Legacy Donating Member 9,520 Member For: 18y 8m 20d Gender: Male Location: Perth Posted 04/07/18 01:15 PM Posted 04/07/18 01:15 PM Or use my axle speed/ rpm. Cause it will be the same as yours. Some diff ratio, same gearbox. Same 4th gear run.
IH8TOADS Legacy Donating Member 3,618 Member For: 21y 9d Gender: Male Location: OZ Posted 04/07/18 06:15 PM Posted 04/07/18 06:15 PM If it’s manual you just use the diff ratio. Ie axle rpm x diff ratio = engine rpm. There is no slip with a manual so it’s easy as and precise.
masda74 To Loud Legacy Donating Member 4,114 Member For: 14y 7m 17d Gender: Male Location: WA, Perth Posted 03/09/18 12:48 AM Posted 03/09/18 12:48 AM I can't find the right place to put this, so I thought I would put it here.
Ezy2Confuze Member 899 Member For: 16y 9m 2d Gender: Male Location: West Perth. Posted 03/09/18 01:54 AM Posted 03/09/18 01:54 AM Anyone else booked for the All Ford Day cruise this year to York? https://www.facebook.com/events/260482197871526/ It is back for 2018, the All Ford Day Cruise and will be on Sunday October 28. As with 2016 our destination will be York and the departure points will be Midland, Cockburn and Kingsway.Reserve the date in your calendar and stay tuned for more information as the event draws closer.
Rockatansky Member 591 Member For: 16y 3m 6d Gender: Male Posted 06/09/18 09:53 AM Posted 06/09/18 09:53 AM 28 Oct 18, $10 Took my other ride for a spin last time out to York in 2016: 2
Renton Member 151 Member For: 8y 3m 11d Gender: Male Location: Perth Posted 06/09/18 11:09 AM Posted 06/09/18 11:09 AM Nice coupe mate! What eng/driveline she running? Would like to say I will make it to the cruise but flat out with work atm so doubt I'll have my car finished 1
Rockatansky Member 591 Member For: 16y 3m 6d Gender: Male Posted 08/09/18 08:30 AM Posted 08/09/18 08:30 AM 351/FMX/9 inch
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 9m 24d Gender: Male Location: Perth Posted 18/09/18 02:00 AM Posted 18/09/18 02:00 AM (edited) Spotted @Boganspeedon the way back from tech at the plex. Was there with a couple of the usual suspects drinking coffee and looking at cars. The Army Tank got to hang out with its great grandad and its annoying American cousin. Edited 18/09/18 02:00 AM by Ralph Wiggum 3
k31th less WHY; more WOT Site Developer 30,020 Member For: 18y 3m 7d Gender: Male Location: Melbourne Posted 18/09/18 02:10 AM Posted 18/09/18 02:10 AM Did you give your car a run?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now