SPIKO Legacy Donating Member 1,924 Member For: 21y 3m 26d Gender: Male Posted 24/03/10 10:55 AM Author Posted 24/03/10 10:55 AM I didn't realize how photogenic brad was well done Tiger...
turbo ute79 Member 376 Member For: 17y 11m 6d Gender: Male Location: gladstone qld Posted 24/03/10 12:37 PM Posted 24/03/10 12:37 PM good luck at the track on sat mate. big bragging rights for the first manual into the 10s. (I dont think anyone has done it yet) would have loved to have seen you do it last weekend when I was down that would have been pretty cool to see.
ALF05T Member 453 Member For: 19y 6m 19d Gender: Male Location: Sydney Posted 24/03/10 04:52 PM Posted 24/03/10 04:52 PM Hey SpikoDo you get that annoying lag between gear changes? Is there anything that can be done regarding tuning to reduce this problem (maybe setting a delay), or just smashing the gear lever as fast as possible?Probably a dumb question but you have to ask!It would be great to see your car run that 10, keep at it!Cheers Alf.
Headsex Legacy Donating Member 2,528 Member For: 20y 11m 23d Gender: Male Location: Melb Posted 24/03/10 10:03 PM Posted 24/03/10 10:03 PM Alf,With some throttle control tuning, manual cars are able to be flat shifted without lifting the throttle..d.
SPIKO Legacy Donating Member 1,924 Member For: 21y 3m 26d Gender: Male Posted 24/03/10 10:44 PM Author Posted 24/03/10 10:44 PM Agreed Danny,However I will not be Flat shifting What I will be doing is not far off it however much less stressfull on the drivetrain..
ALF05T Member 453 Member For: 19y 6m 19d Gender: Male Location: Sydney Posted 24/03/10 10:54 PM Posted 24/03/10 10:54 PM Alf,With some throttle control tuning, manual cars are able to be flat shifted without lifting the throttle..d.What do you mean throttle control tuniing? This is a new concept for me.
Headsex Legacy Donating Member 2,528 Member For: 20y 11m 23d Gender: Male Location: Melb Posted 24/03/10 11:10 PM Posted 24/03/10 11:10 PM However I will not be Flat shifting What I will be doing is not far off it however much less stressfull on the drivetrain..Should fit a Liberty 5 speed to it :DJust don't back off whilst your in gear, or else it drops out of gear! What do you mean throttle control tuniing? This is a new concept for me.The pcm has a number of RPM limits, and limiting techniques. The factory limits have the throttle rpm limit set to 6000rpm, so as its approching 6000rpm, it starts closing. Most tuners disable this by setting it to say 7000rpm. Then there's also cylinder drop, which depending on model is anywhere from 6150 to 6300rpm. When this limit is exceeded, it drops cylinders. This is also known as hard cut.By strategically adjusting the Throttle limit, as well as the Hard limit, they can be setup so on a manual vehicle, you can keep the throttle mashed, even whilst changing gear, and the engine RPM will not buzz out of control whilst the clutch is depressed.Its something I found without knowingly doing it.. One of the car's I tuned come back to me, and said "watch this vre, full flat shift" (yes, he was greek)d.
The_Bogan Legacy Donating Member 881 Member For: 19y 3m 30d Gender: Male Location: Brisbane, Queensland Posted 24/03/10 11:25 PM Posted 24/03/10 11:25 PM will be there with video camera in hand to watch this epic event!!!!!pity my car still has a broken gearbox, I would have lined you up spiro
qik1 Legacy Donating Member 2,720 Member For: 18y 2m 23d Gender: Male Location: Loitering in SEQ Posted 25/03/10 02:15 AM Posted 25/03/10 02:15 AM I wish I wasnt in the middle of doing a number on mine at the moment id come especially to watch this. No matter what happens it'll be exciting. What tune will you be running when you go down the track???
SPIKO Legacy Donating Member 1,924 Member For: 21y 3m 26d Gender: Male Posted 25/03/10 08:59 AM Author Posted 25/03/10 08:59 AM (edited) Should fit a Liberty 5 speed to it :DJust don't back off whilst your in gear, or else it drops out of gear! The pcm has a number of RPM limits, and limiting techniques. The factory limits have the throttle rpm limit set to 6000rpm, so as its approching 6000rpm, it starts closing. Most tuners disable this by setting it to say 7000rpm. Then there's also cylinder drop, which depending on model is anywhere from 6150 to 6300rpm. When this limit is exceeded, it drops cylinders. This is also known as hard cut.By strategically adjusting the Throttle limit, as well as the Hard limit, they can be setup so on a manual vehicle, you can keep the throttle mashed, even whilst changing gear, and the engine RPM will not buzz out of control whilst the clutch is depressed.Its something I found without knowingly doing it.. One of the car's I tuned come back to me, and said "watch this vre, full flat shift" (yes, he was greek)d.Danny, both the limits you are referring to are set to 7400rpm in my car LOL will be there with video camera in hand to watch this epic event!!!!!pity my car still has a broken gearbox, I would have lined you up spiro Thanks Steve Plenty of time for me and you I wish I wasnt in the middle of doing a number on mine at the moment id come especially to watch this. No matter what happens it'll be exciting. What tune will you be running when you go down the track???Cheers John, we will catch up mate eventually LOL... Just let me get these formalities out of the way first.. Edited 25/03/10 09:00 AM by SPIKO
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now