bossmang FREAKY Legacy Donating Member 12,441 Member For: 16y 7m 20d Gender: Male Location: Melbourne Posted 15/05/12 10:33 AM Posted 15/05/12 10:33 AM Sweet!!!! How many in south eastern suburbs/ near rowville???check the united site, they said to me that the servos listed with e85 are up to date!
possum Legacy Donating Member 553 Member For: 17y 2m 22d Gender: Male Posted 15/05/12 10:45 AM Posted 15/05/12 10:45 AM Possum do you mean machine the 0.5 cover?RAPID I reckon that nizpro car would be struggling to make more boost if its got the stock cover and wheel (I forget what car it was already!!). Also depending on the injectors you often see AFR curves like that and that's due to the standard speed density calibration. Possum will verify that it's unchanged.As far as I'm aware we can machine down the snout on the .7 front cover to suit our intakes.The first dyno graph that Henz posted is of a BF typhoon with .7 front cover, standard wheel along with our stage 2 kit and exhaust etc.the graph that I posted is of Glouva1's fg running a gtx3582r with our exhaust etc but standard crossover and blue power airboxIn regards to the speed density tables I believe the majority of time they go untouched unless people have fitted camshafts or the bigger plazmaman plenums
j.d Member 1,222 Member For: 16y 18d Gender: Male Location: Eastern Suburbs, Melbourne Posted 15/05/12 10:52 AM Posted 15/05/12 10:52 AM check the united site, they said to me that the servos listed with e85 are up to date!yes up to date with whats already out! not with whats coming out !
Shyfrd Turboless Legacy Donating Member 5,992 Member For: 15y 5m 18d Gender: Male Location: Geelong, Victoria Posted 15/05/12 10:52 AM Posted 15/05/12 10:52 AM Wonder how quickly its updated too. As its being installed or a week after its in?
XXXRTURBO Legacy Donating Member 1,168 Member For: 19y 10d Gender: Male Location: Melbourne Posted 15/05/12 10:54 AM Posted 15/05/12 10:54 AM check the united site, they said to me that the servos listed with e85 are up to date!Yeah just checked there is one on ferntree Gully rd 5-10 mins from my joint!!!!
bossmang FREAKY Legacy Donating Member 12,441 Member For: 16y 7m 20d Gender: Male Location: Melbourne Posted 15/05/12 10:56 AM Posted 15/05/12 10:56 AM yes up to date with whats already out! not with whats coming out !yes that's correct, would be good if they listed up and coming servos! but I guess the average person doesnt care about a new servo opening up hahahaYeah just checked there is one on ferntree Gully rd 5-10 mins from my joint!!!!you have no excuses now man!!!!!!!!!!do it!
ryan_04 Member 97 Member For: 17y 8m 21d Gender: Male Posted 15/05/12 11:03 AM Posted 15/05/12 11:03 AM fk this thread makes u think lol....neway its a hot topic atm but hpf had a couple of seasons of this show called ozgarage..pretty good actually if u watch the eps - neway this is one of them - a whole episode dedicated to E85...done back in 2010..also had an episode on the fg falcon rangehttp://www.ozgarage.com.au/season2-video/s2-episode-6-online-e85-fuel
ratter Member 6,793 Member For: 20y 2m 18d Gender: Male Location: @ my laptop Posted 15/05/12 11:14 AM Posted 15/05/12 11:14 AM What is cold start like on e85? My car takes 2-3 cranks since doing the PW surge, and I dot have faith in my odyssey if it was going to be much more than that.has your surge tank pump got the one way valve fitted, I can't remember
Paulie2256 Legacy Donating Member 7,441 Member For: 17y 8m 23d Gender: Male Location: SE Melbourne Posted 15/05/12 11:20 AM Posted 15/05/12 11:20 AM What is the one way valve for? Mine does the same. Plazmaman surge and takes about 3 cranks instead of 1 and a half
XXXRTURBO Legacy Donating Member 1,168 Member For: 19y 10d Gender: Male Location: Melbourne Posted 15/05/12 11:21 AM Posted 15/05/12 11:21 AM yes that's correct, would be good if they listed up and coming servos! but I guess the average person doesnt care about a new servo opening up hahahayou have no excuses now man!!!!!!!!!!do it!Well there is lol, I am not gonna be living down here much longer moving to paki and there is none up there which is gonna be a pain in the ass. Plus more power more things to upgrade I.e input shaft and tail shaft, and I dont have the time atm just to busy with the house. I will do it as soon as my crib is finished.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now