Jump to content

Recommended Posts

  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 2m 1d
  • Gender: Male
  • Location: Adelaide
Posted

dam mate wonder how happy u would get if u changed ya air filter

  • Manual mode ________________________ All day, erryday
  • Legacy Donating Member
  • Member For: 18y 8m 8d
  • Gender: Male
  • Location: Probably above atmospheric pressure
Posted

Cleaned throttle body, lubed boost solenoid and then something new for me - did the idler pulley and tensioner pulley change today. Car isn't showing battery light and still steers well so I must have got the belt on properly hahaha. The hardest part was not having the correct size breaker bar. Was barely able to use a short ratchet handle of the right size to loosen old one off, but new belt was laughing at me when I tried the same to put it on. Eventually manoeuvred a much longer 1/2 inch with adapter (3/8" is it?) in there, thing was hard to get back out!

2012-07-21131612edit.jpg

Also cleaned the crossover and some of the other piping for the first time in about 2 years! Didn't bother with metal surfaces as was just playing with my silicone spray really :) Also a bit on the new pulleys before fitting to extend life hopefully.

2012-07-21143740edit.jpg

2012-07-21143801edit.jpg

  • Legacy Donating Member
  • Member For: 18y 8m 23d
  • Gender: Male
  • Location: left right out
Posted

Fitted a pair of Phillips led day running lights today to my courier ute as I do a fair bit of open road driving, so visibility is important.

A really nice kit, plug n play. A wire to battery neg and pos, and a trigger wire to the parkers. Unit senses voltage dip on startup and turns on, and turns itself off when the engine is turned off or the lights are turned on. Very tricky and super bright white light.

  • Talks Cheap, Let's Race
  • Member
  • Member For: 19y 8m 17d
  • Gender: Male
  • Location: Atherton, FNQ
Posted

changed the diff oil and checked the trans fluid for the first time since it was rebuild 18 months ago. diff oil was turning black, trans fluid was as clean as the day it was put in. replaced 2 exhaust hanger rubbers as well.

  • Like 1
  • Turboless
  • Legacy Donating Member
  • Member For: 15y 5m 5d
  • Gender: Male
  • Location: Geelong, Victoria
Posted

Sold it !!

You sold pinky?

  • Member
  • Member For: 14y 7m 28d
  • Gender: Male
  • Location: Westside
Posted

Installed my capa intercooler today

Was abit harder then I expected

  • Legacy Donating Member
  • Member For: 15y 6m 22d
Posted

Next time your doing the belt or getting at the front of the motor, rip the thermofans out it literally takes 2 minutes.

2x 10mm (I think that's the size) bolts either side of the rad, up the top, and disconnect the wiring, then the assembly just lifts out.

Today I decided, that tomorrow at some stage, I will wash it mine and fill it with fuel.

Last weekend I fitted a catch can, then used some of that Subaru upper engine cleaner, worked okay, blew f*ck all white smoke compared to other cars I've seen.

Changed the oil after doing that too.

  • Like 2
  • Waiting for the 1st N/A 12!
  • Legacy Donating Member
  • Member For: 18y 5m 21d
  • Gender: Male
  • Location: Sydney
Posted

Smoked a GTR!

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...