Jump to content

Recommended Posts

  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 2m 16d
  • Gender: Male
  • Location: Adelaide
Posted (edited)

 

Edited by JETURBO
  • Like 3
  • Legacy Donating Member
  • Member For: 22y 11m 12d
  • Gender: Male
  • Location: Townsville
Posted

I watched them both

 

On 05/12/2020 at 8:44 PM, JETURBO said:
Puffy throwing flames
PMDtcts.jpg

Epwm8Gb.jpg

Are you sure those flames weren't added from Duke Nukem or Serious Sam?

  • Legacy Donating Member
  • Member For: 11y 6m 17d
  • Gender: Not Telling
Posted

3.58s 0 to 100 this afternoon with a somewhat tame 2nd gear launch.

 

Also the actuator hose had come off sometime at or before roll racing so it was making all the boost! :w00t2:

 

Fixed that and put new plugs in this afternoon. Winning :pandalol:

  • Like 2
  • Haha 1
  • less WHY; more WOT
  • Site Developer
  • Member For: 18y 4m 6d
  • Gender: Male
  • Location: Melbourne
Posted

you'd assume near the end if you managed to win races... you probably wouldn't have a good tune that could make use of the entirety of boost that the turbo is capable of haha

  • Legacy Donating Member
  • Member For: 11y 6m 17d
  • Gender: Not Telling
Posted

The tune is capable of running all the boost that actuator can hold, which is either 100% wgdc or the hose off lol. It would have picked up a lot in the midrange probably and stuff all up top. It was at 90% wgdc to hold 25psi at redline while tuning the e85 stuff last time, so not much room to grow there. A stiffer actuator would be a different story.

  • less WHY; more WOT
  • Site Developer
  • Member For: 18y 4m 6d
  • Gender: Male
  • Location: Melbourne
Posted

I guess without an actuator hose the actuator would creep open as the boost level rises as the solenoid isn't providing any help to keep it closed, depending on the full mechanical situation it's in...

 

yeah, a stiffer actuator may have lunched some strong hardware in the driveline... a little lucky in that respect, at least.

  • Legacy Donating Member
  • Member For: 11y 6m 17d
  • Gender: Not Telling
Posted

Haha what strong hardware? It's all stock except the engine and bolt ons. We'll see how long my luck lasts with the trans though. It'll put a lot more stress onto the hard parts after the clutches get upgraded.

 

The solenoid only helps open the actuator, as it is a one port wg. A 2, 3 or 4 port helps it stay shut.

  • Like 1
  • less WHY; more WOT
  • Site Developer
  • Member For: 18y 4m 6d
  • Gender: Male
  • Location: Melbourne
Posted

true... maybe "strong" was the wrong adjective... :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...