Jump to content

Recommended Posts

  • Moar Powar Babeh
  • Legacy Donating Member
  • Member For: 20y 11m 5d
  • Gender: Male
  • Location: Perth
Posted

I'll contribute 50 bucks for a tat of a flaming 44 full of clean washing...

  • Like 1
  • Manual mode ________________________ All day, erryday
  • Legacy Donating Member
  • Member For: 18y 9m 3d
  • Gender: Male
  • Location: Probably above atmospheric pressure
Posted

EDIT:it look like a cosmic space vagine and uterus....that's deeeeeeeeeeeep man.

Looks like one of those woodland pixies pulling their legs back and showing their brekkie :P

I'm late to the party but I also saw it as some scary female devil thing pulling the legs back and possibly just finished doing a ping pong ball trick (bit open at the end there, maybe it was billiard balls).

You can't be accused of doing a tramp stamp half hearted at least! Thanks for posting despite it being lolworthy, good sport.

  • Like 3
  • XR50T
  • Legacy Donating Member
  • Member For: 13y 3m 27d
  • Gender: Male
  • Location: Western Sydney
Posted

Cleaned turbo oil supply filter on Wednesday and oil looked pretty farked. So did any early oil change and flushed it with cheap oil (around 1500km since last change). The whole lot was full of sh*te, looked like metallic paint.

Will cut the filter open tomorrow and have a look. Nothing stuck to an earth magnet in the oil so I'm thinking bearings are farked.

The one time I use full synthetic farken.

  • Like 1
  • ...JD TUNING ADELAIDE...
  • Legacy Donating Member
  • Member For: 18y 2m 28d
  • Gender: Male
  • Location: Adelaide
Posted

f*ckn lol

  • Like 1
  • Expert
  • Legacy Donating Member
  • Member For: 21y 6m 1d
  • Gender: Male
  • Location: North Jamberoo, NSW
Posted

want to do mine? Show me next time

Cleaned turbo oil supply filter on Wednesday and oil looked pretty farked. So did any early oil change and flushed it with cheap oil (around 1500km since last change). The whole lot was full of sh*te, looked like metallic paint.

Will cut the filter open tomorrow and have a look. Nothing stuck to an earth magnet in the oil so I'm thinking bearings are farked.

The one time I use full synthetic farken.

  • XR50T
  • Legacy Donating Member
  • Member For: 13y 3m 27d
  • Gender: Male
  • Location: Western Sydney
Posted

Got a speedflow one. Easy to change/clean.

Cheers Bellend, got brad penn in it now.

  • Manual mode ________________________ All day, erryday
  • Legacy Donating Member
  • Member For: 18y 9m 3d
  • Gender: Male
  • Location: Probably above atmospheric pressure
Posted

If I ever use anything aside from full syn I bet the same thing will happen to me. 269,000km and counting! Must have been a rude shock to the engine :)

Good luck Ozy. Wouldn't be a good feeling.

  • Moar Powar Babeh
  • Legacy Donating Member
  • Member For: 20y 11m 5d
  • Gender: Male
  • Location: Perth
Posted

Superior detergent pack in Full Synth washes crap left behind by semi out....Blame full synth

genius.jpg

  • Like 2
  • XR50T
  • Legacy Donating Member
  • Member For: 13y 3m 27d
  • Gender: Male
  • Location: Western Sydney
Posted

Dunno raplh. Always used a flush when I change the oil so you'd think that would sort any crap out.

Always used brad penn before and never had a problem so I'll blame the penrite sh*te.

  • I'm getten too old for this s**t
  • Legacy Donating Member
  • Member For: 13y 4m 21d
  • Gender: Male
  • Location: A big bridge over a river in South Australia
Posted

2am SA time

Just did a half shaft and had to leave the car in some shopping centre car park SoMeWhErE in Adelaide and a mate is letting me sleep on his couch but I have no idea where the fark I am

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...