Jump to content

Recommended Posts

  • Legacy Donating Member
  • Member For: 18y 5m 18d
Posted (edited)

I`d like to see that...

that's one interesting car for sure.

I`d love to have a chat to Kyle when he wasn`t so involved.

The brief words I had told me he`s pretty switched on.

That R-Spec spoke volumes too..

Edited by _Spin_
  • Legacy Donating Member
  • Member For: 21y 3m 16d
  • Gender: Male
Posted

Same as mine Trav, no wallabies today tiger? How fast were you going when you hit it?

  • Member
  • Member For: 16y 11m 16d
  • Gender: Male
  • Location: Wee Waa/NSW
Posted

Dont no 115 when I seen it. then locked it up swing it a bit. Then f*ck f*ck f*ck u f*cking *beep*................ Thank god it did nothing

  • blind leading the blind
  • Member
  • Member For: 17y 10m 12d
  • Gender: Male
  • Location: Mt Alford, Queensland
Posted

hey spiro - make sure you keep the broken housing too - wouldnt mind having a gander at it just to see where they break exactly

  • Legacy Donating Member
  • Member For: 18y 1m 28d
  • Gender: Male
  • Location: Dalby
Posted

Hi guys. The r spec in question is my pride and joy. It's been built to a very spesific plan by 6boost from start to finish. I can tell you there are very big plans for this car in the near future. Those that have seen it in the flesh will no doubt know that just like spiros car, there have been no short cuts taken. I'll really have to get on and put a thread in the 500kw section very soon.

It's currently running a t51. So it's still very well mannered on the Xtreet. Yet packs a serious punch when push it. I've never owned such a nice car with so much power. Needless to say I love having it in the shed.

Spiro, was great meeting you at the track mate. As soon as you have that black beast sorted we need to set up some side by side action. I'm sure everyone here would love to see that.

Roland.

  • Legacy Donating Member
  • Member For: 21y 3m 16d
  • Gender: Male
Posted

Thank's Roland,

As I said it was a pleasure meeting you all, shame about the run but that's racing, What I will say however in short because words a cheap nowday's is that when these two cars get it right and hold together I believe that you will all be surprised with the outcome!

Of-course I can launch it softly :buttrock: but that will not give me the results I am looking for and potential of this car! So its all or nothing attitude where I come from, the law of averages will eventually work in our favour.

Matt I will take some pics of it for you when I remove it before I head back out to Mal's.

  • blind leading the blind
  • Member
  • Member For: 17y 10m 12d
  • Gender: Male
  • Location: Mt Alford, Queensland
Posted

cheers mate - make sure you keep us posted with whats going on - ill try n organise another cruise so you can run the new cvs in lol

  • Legacy Donating Member
  • Member For: 21y 3m 16d
  • Gender: Male
Posted (edited)

Your funny LOL, just read your previous post, 15.1@61mph that's got to be some kind of record Mat LMAO, considering how much time I spent in the 60 foot zone and the fact I came of it in second at 5900rpm :buttrock: At least I am getting closer right Matt?

Edited by SPIKO
  • Legacy Donating Member
  • Member For: 18y 5m 18d
Posted (edited)

R/T = 1.869

60` = 3.342

330` = 7.236

1/8 = 10.013

MPH = 82.04

1000` = 13.022

1/4 = 15.960

mph = 72.57

that's Spiro`s run.. Watch the vid again and see he virtually only gives it a quick blat in each gear used.

If the planets align and that black car can run even close to its true potential, it`ll be something to see..

Rolands car did 10.8 in as hot as conditons as you`d ever care to see at the time of night it ran. I`m no expert but I`d have liked to have seen the car move out of the water during the burnout, I`ve seen cars sit in it and have droplets falling onto the tyres on the line.

Kyle hit the limiter during the run. Can`t blame him its not his car.

But it looked he was going to get milk and the papers. Looked pretty casual to me.

Side by side?? I can`t wait!

Edited by _Spin_

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...