Jump to content

New Purchase/Build - Home Renovations - Gardens - Garages & Sheds.


Recommended Posts

  • All stock bar the k&n panel filter
  • Legacy Donating Member
  • Member For: 14y 4m 5d
  • Gender: Male
  • Location: Perth
Posted

Where's the dog Stevo?

  • Like 1
  • Manual mode ________________________ All day, erryday
  • Legacy Donating Member
  • Member For: 18y 7m 24d
  • Gender: Male
  • Location: Probably above atmospheric pressure
Posted

Tends to ride in Jen's car and she was going from building site straight to work this morning. 7am meeting sucked, I'm asleep at home until 7:30am!

  • Expert
  • Legacy Donating Member
  • Member For: 21y 4m 21d
  • Gender: Male
  • Location: North Jamberoo, NSW
Posted

cool colours Steve. Question Garage floor what happening there? Will you concrete it later.

  • Manual mode ________________________ All day, erryday
  • Legacy Donating Member
  • Member For: 18y 7m 24d
  • Gender: Male
  • Location: Probably above atmospheric pressure
Posted

They do it.  There's also paving to come in front of it.  Unless it's all paved but I am sure it's concrete.  We need to concrete the alfresco ourselves since we deleted paving there.  Planning on large slate tiles instead.

  • Like 1
  • Expert
  • Legacy Donating Member
  • Member For: 21y 4m 21d
  • Gender: Male
  • Location: North Jamberoo, NSW
Posted

Good I was hoping they weren't going to leave it as is, just dirt.

  • Manual mode ________________________ All day, erryday
  • Legacy Donating Member
  • Member For: 18y 7m 24d
  • Gender: Male
  • Location: Probably above atmospheric pressure
Posted

Hey hey...red river bed sand.  

  • Bob the Freaking Builder
  • Legacy Donating Member
  • Member For: 16y 10m 5d
  • Gender: Female
  • Location: SA
Posted (edited)

Looking good guys !!! 

 

Jet and and I have started the ball rolling and I've started designing plans on a rough idea of a layout for a house. 

We've  decided to use my lecturers' abundance of knowledge in building design and  as well as architecture to spend the next couple years refining the house idea before building to make it the most energy efficient and best place we can while having the most cost effective build possible. Since I already have a sparky and a plumber and a bricky and a concreter as family/ friends I am hoping to do it as cost effective as possible. We've started looking at blocks ... Something around the 10-30,000m2 mark with a view over Adelaide in the hills (only 20kms from the centre of the cbd) there will likely be a slope but since I'm going to be the builder I am willing to deal with it for the rewards. I've always wanted an open space to work with. The original plans are a 2 story 5 bed home and I want to have an American style similar to this: 

image.jpeg.e59fd809a20b645352ae1bbc224ca

 

My current plans are allowing for around 450m2 of living space then garage ontop of that ... Probably gonna have to make it a little smaller than that depending on budget it could end up a flop or a success lol 

time will tell over the next 2 years 

Edited by Princess Whinginator
  • FREAKY
  • Legacy Donating Member
  • Member For: 16y 6m 23d
  • Gender: Male
  • Location: Melbourne
Posted

and a room for me when I stay over please fluff

xo

  • Bob the Freaking Builder
  • Legacy Donating Member
  • Member For: 16y 10m 5d
  • Gender: Female
  • Location: SA
Posted (edited)

Haha  no 

Edited by Princess Whinginator
  • Legacy Donating Member
  • Member For: 11y 8m 26d
  • Gender: Male
  • Location: Melbourne, VIC
Posted

We are going for the same style of house Fluff, but on a far smaller scale and a few more modern touches (Estate forced).

Since this is the right thread, I figure I'll ask in here. I just realised I want a sink in my future shed/garage/workshop that I will be getting done after handover of our build. We are currently finalising plans with the builder and I was wondering if I should get the drainage/plumbing done by the builder in an effort to save money in case it's a bitch of a job after handover.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...