Bomber Carnage on the Garage Floor Legacy Donating Member 3,994 Member For: 16y 2m 27d Gender: Male Location: Gold Coast Posted 25/04/15 07:38 AM Author Posted 25/04/15 07:38 AM Replacement new cams pretty cheap actually - like $600 from memory. Rockers though - gold! I think some are overplaying this. As long as the hard casing hasn't been damaged then no biggie. Same if the rollers have a few marks on them. Mine were fine but the cams were average as we know. 1
Wilko16 Legacy Donating Member 1,672 Member For: 18y 8m 17d Gender: Male Location: Melbourne Posted 25/04/15 08:51 AM Posted 25/04/15 08:51 AM Yep As long as chunks are not coming out of them it is normal marking 1
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 10m 15d Gender: Male Location: Perth Posted 25/04/15 10:54 AM Posted 25/04/15 10:54 AM Won't somebody please think of the camshafts 2
Z2TT Member 714 Member For: 14y 2m 12d Posted 25/04/15 12:58 PM Posted 25/04/15 12:58 PM (edited) I don't get it, if they wear so excessively doesn't that mean the valve is going to open less and less the more the camshaft lobe get's worn, I have seen engines with 200,000km with better looking camshafts than some of these pictures Edited 25/04/15 12:59 PM by Z2TT 1
Bomber Carnage on the Garage Floor Legacy Donating Member 3,994 Member For: 16y 2m 27d Gender: Male Location: Gold Coast Posted 25/04/15 10:41 PM Author Posted 25/04/15 10:41 PM None of the wear shown in photo's I've seen so far is 'excessive' though. What we've got is an issue concerning the hard casing.I hope the results of my donor cams come back soon so we have some facts.
Wilko16 Legacy Donating Member 1,672 Member For: 18y 8m 17d Gender: Male Location: Melbourne Posted 25/04/15 10:52 PM Posted 25/04/15 10:52 PM Here is some pics of hardening failure...These are bad worn cams, I'm not saying ours don't get like this but there is a big difference between a few lines on it that look bad and an actual cam lobe failure NOTE- this are Google images, not ford cams! 1
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 10m 15d Gender: Male Location: Perth Posted 26/04/15 12:23 AM Posted 26/04/15 12:23 AM Beware of Cams Shaft.....where....? 2
genuine honest person Member 2,769 Member For: 12y 6m 10d Gender: Male Location: near brisbane Posted 26/04/15 08:33 AM Posted 26/04/15 08:33 AM have just removed the cams and rollers ,the rollers must be the culprit that destroys the cam . the cam does not look to bad but the rollers definitely look looked like they are scored. have also just removed the head and have found score marks in most of the bores (straight up and down ) also the carbon looks like some of it started to flake of ? going to try again to post pictures tonight after I have removed the sump
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 13y 2d Gender: Male Location: Adelaide Posted 26/04/15 09:04 AM Posted 26/04/15 09:04 AM Gunna. Do you know the blokes address who sold you the motor. Do you have a gun license?Time to get even. Lol 2
Z2TT Member 714 Member For: 14y 2m 12d Posted 26/04/15 09:30 AM Posted 26/04/15 09:30 AM Yeah I just want to be sure if it's something that needs action taken we can try to do something now, rather than find out 13 years down the track when it begins causing everybody issues then nobody will really care as the car will be old.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now